Safety management
Construction companies use a wide range of safety practices as part of their safety management programmes, with an increasing emphasis on creating a safety culture throughout the organisation.
Some of the practices that can be employed on projects to manage safety include:
- Involving workers in the safety process, through toolbox talks, safety briefings, site inductions, offering safety incentives, and so on.
- Analysis of potential site safety hazards during the preconstruction phase.
- Adopting the principles of prevention: avoid risks where possible; evaluate those risks that cannot be avoided; put in place measures that control them at source.
- Encouraging an open-door policy for workers to report accidents, injuries, hazards and near misses.
- Conducting thorough near miss and incident investigations to ensure effective action is taken.
- Employing specific personnel assigned to manage safety.
- Designating health and safety duties to on-site staff, such as a first aider.
- Conducting regular project safety audits.
- Developing a site-specific health and safety plan.
- Site specific training programmes for workers and subcontractors.
- Proper use of personal protective equipment (PPE).
Safety management is a very broad subject. Some of the articles on Designing Buildings Wiki that provide an introduction to the practices, principles and regulations involved include:
- As Low As Reasonably Practicable (ALARP).
- Briefback.
- CDM.
- Construction health risks.
- Control of Substances Hazardous to Health (COSHH).
- Emergency plan.
- Environmental health.
- Health and safety.
- Health and safety at Work etc act 1974.
- Health and safety consultant.
- Health and Safety Executive.
- Health and safety file.
- Health and safety inspector.
- Health and safety policy.
- Incident reporting system.
- Injuries on construction sites.
- Management of Health and Safety at Work Regulations 1999.
- Manual handling assessment chart.
- Method statement.
- Near miss.
- Personal protective equipment.
- Pre-construction information.
- Principal contractor.
- Principal designer.
- Project risk.
- Proximity warning systems.
- Reporting accidents and injuries on construction sites.
- Risk assessment.
- Risk management.
- Risk of rats in construction.
- Safety.
- Safety as a Service.
- Safety audit.
- Safety briefing.
- Site induction.
- Site inspection.
- Site safety.
- Toolbox talk.
- What is a hazard?
- Work at height regulations.
- Workplace (Health, Safety and Welfare) Regulations 1992.
For a full list, see Health and Safety / CDM.
[edit] External references
Featured articles and news
Industry survey highlights persistent skills gap
Building engineering business survey by ECA in partnership with BESA, SELECT and SNIPEF.
IHBC Conservation Professional Practice Principles
Spotlighted in HEF Historic Environment Overview.
CIAT collaborates with CIOB, CIfA, Icon to launch The Arc
Helping clients find specialist historic environment professionals.
Government building safety remediation data releases
Show some progress, but a 50% gap not yet started.
Testing For A Safer Future; an initial industry response
A response to the Independent Review of the Construction Product Testing Regime.
Requirements for UK buildings in certain circumstances.
CLC guidance for dutyholders and accountable persons.
Types of contractor in the construction industry
A long list, but are any missing ?
The Housing (Cladding Remediation) (Scotland) Bill 2023
Unanimously approved to legislation on May 14, 2024.
Asset information requirements AIR
In detail, with links to further resources.
Where it's AT Building Safety podcasts from CIAT
Unravelling the Golden Thread and CIAT’s Principal Designer Register for non-HRBs and HRBs.
What happened to Hadrian's Wall?
Its former stones can be found in buildings near its route.
Strategic ventilation in modern building design
Download your free guide.
Four new types of prior approval for solar developments
Online Planning Portal application types from 5 September.